ASCOM TEMMA DRIVER DOWNLOAD

The same cannot be said about some other brands of equatorial mounts which, according to what we often heard, develope both electronic and mechanical problems. I verified that the mount was reporting "cannot set tracking" then ran an ACP ppan without any problems. Then you can use whichever driver suits your needs. Thanks for taking the time to post here for others. Results 1 to 9 of 9. To use go to your Telescope dialog and click, Connect, you should now be able to control your mount using that program. JPG x KB.

Uploader:	Gokasa
Date Added:	21 August 2005
File Size:	19.82 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	37710
Price:	Free* [*Free Regsitration Required]

Good to know though. But the periodic error of my EM measured to be smooth and well within the specification of 10 arc-seconds. I chose this mount as part of an "ultra-portable" imaging system. Larry, If you need some advices on the Temma driver, don't hesitate. I bypassed that by connecting the scope with ascomm control enabled, let it turn it off, then turned it back on, then disabled tracking control.

Goto was always within 5 arc-min and typically asco 2 arc-min. Release Notes and Instructions: The EM draws up to 2.

The Kagayaki III software mentioned above does offer a mode where it can drive the Temma PC mounts etmma a non-equatorial mode where the situation may demand it.

It has been reported that this driver also works with the RCX except it doesn't allow access to its unique features. Average power consumption is under 1 Asscom at 24V. The primary differences between the Temma 2 models and the older Temma PC models are higher speed stepper motors and improved precision of the controller electronics. The same cannot be said about some other brands of equatorial mounts which, according to what we often heard, develope both electronic and mechanical problems.

Focus Max would go off to focus tejma come back with sub 1 arc-min accuracy. To connect, go to the Telescope Menu click Link then Establish and you should be connected.

Temma by Takahashi ASCOM Driver

Great news - glad to be of help. The EM Temma PC Jr fits this bill primarily because it combines the precision features needed for imaging with light weight needed for portability the head weighs 24 lbs.

See ascomm help file and release notes!

It also recognises the StarSense HC. JPG x KB. Telescope Installs a driver for all computerized Celestron telescopes. The Temma PC system relies on the polar alignment of the mount for goto accuracy.

For details see Takahashi Japan's Temma 2 technical report. I ask that you don't sell the driver or derivative products.

Then we are going beyond where I can help you at the moment. Provides position readout, slews, side of pier where appropriateand pulse guiding among its basic capabilities. Enter the need acom a driver for TheSky. This driver has been supplied by the manufacturer and has passed all conformance tests report here.

Temma by Takahashi Equatorial Mount ASCOM Driver

There are encoders built into the system, but these encoders are located on the worms so they only measure driven mount movements. This driver provides combined telescope, focuser, and dome interfaces each of which may be used by separate programs. Thanks for taking the time to post here for others. A PDF file documenting the protocol is available here. The Temma PC system design is quite straight forward and flexible and should be easily supportable in the future with any needed drivers.

Tema measured goto accuracy using my EM with tema just good polar scope alignment no drift alignment and a Vixen GA4 illuminated guiding reticle. You are welcome to visit and look around here, but you will not see the premium support sections until you are a DC-3 Dreams customer. The hand paddle attached to aecom mount still works when the mount is connected to the PC.